Unplug the steam cleaner from the wall outlet. Remove the microfiber cloth from your steam cleaner. Allow your ceramic tile to dry. Since you are using steam instead of water, drying times are much shorter than mopping or cleaning with soap and water. Do not get your hands or bare feet near the head of the steam cleaner while it is operating to avoid burns. Floors can be slippery immediately after cleaning.
STEP 4: Cutting the tile __ The first step in cutting tile is measuring the size of the tile you wish to cut and transferring the dimensions to the glazed surface of the tile via felt_tip marker. Position the tile on the tile cutter, aligning the center line of the cutter with the axis on which the tile is to be cut. To keep it square, the top of the tile should be held flush to the fence at the top of the cutter. Then, using the lever to which the cutting wheel is attached, draw the cutter across the surface of the tile, exerting a firm, even pressure. Make only one pass with the cutter. Finally, snap the tile.
by Shirley C. Howard on Aug 01, 2018 Ceramic Tile